Style in your home

sed to do the different elements of walls and floors, also involved in duplicating the wall ornamental cornices and moldings. Therefore, domestic stucco can be performed on both the outside and inside the house. Plans for such a s

Style in your home

Plaster done outside the house

Domestic stucco means the performance of various decorations on the walls or floors, the person responsible for the enforcement of such moldings can be used to do the different elements of walls and floors, also involved in duplicating the wall ornamental cornices and moldings. Therefore, domestic stucco can be performed on both the outside and inside the house. Plans for such a stucco home should be done even during the construction of the house, but it will be done at the end of all finishing work. Plaster done outside the home can include adding to the elevation of certain decorative elements made of wood or plaster. In contrast, performed inside a house can for instance be added to strips of decorative panels.


Screen molding

Chair rail ? horizontal molding placed part way up a wall to protect the surface from chair-backs, and used simply as decoration
Chamfer ? bevelled edge connecting two adjacent surfaces
Chin-beak ? Concave quarter-round molding. There are few examples of this in ancient buildings, but is common in more recent times.2
Colonial ? ?Colonial? mouldings are very widely used in various places and has been around for very long time. This profile can be called ?classic? as well since most of houses have it already build into kitchens, fireplaces, furniture, door and windows headers, columns and so on.4
Corner guard ? Used to protect the edge of the wall at an outside corner, or to cover a joint on an inside corner.
Cove molding or Coving ? a concave-profile molding that is used at the junction of an interior wall and ceiling
Crown molding ? a wide, sprung molding that is used at the junction of an interior wall and ceiling. General term for any molding at the top or "crowning" an architectural element.
Cyma ? molding of double curvature, combining the convex ovolo and concave cavetto. When the concave part is uppermost, it is called a cyma recta but if the convex portion is at the top, it is called a Cyma reversa ? The crowning molding at the entablature is of the cyma form, it is called a cymatium.
Dentils ? Small blocks spaced evenly along the bottom edge of the cornice
Drip cap ? this is placed over a door or window opening to prevent water from flowing under the siding or across the glass
Echinus ? Similar to the ovolo molding and found beneath the abacus of the Doric capital or decorated with the egg-and-dart pattern below the Ionic capital3
Egg-and-dart ? One of the most widely used classical moldings3 with egg shapes alternating with V-shapes and known from Ancient Greek temples (Erechtheion).

Also: Egg and tongue, egg and anchor, egg and star

Fillet ? small, flat band separating two surfaces, or between the flutes of a column
Fluting ? Vertical, half-round grooves cut into the surface of a column in regular intervals, each separated by a flat astragal. This ornament was used for all but the Tuscan order
Godroon or Gadroon ? Ornamental band with the appearance of beading or reeding, especially frequent in silverwork and molding. It comes from the Latin word Guttus, meaning flask. It is said to be derived from raised work on linen, applied in France to varieties of the, bead and reel, in which the bead is often carved with ornament. In England the term is constantly used by auctioneers to describe the raised convex decorations under the bowl of stone or terracotta vases. The godroons radiate from the vertical support of the vase and rise half-way up the bowl.

Also: Gadrooning, lobed decoration, (k)nukked decoration, thumb molding

Guilloché ? Interlocking curved bands in a repeating pattern often forming circles enriched with rosettes and found in Assyrian ornament, classical and Renaissance architecture.3
Keel molding ? with a sharp edge, resembling in cross-section the keel of a ship. It is common in the Early English and Decorated styles.
Ovolo ? Simple, convex quarter-round molding that can also be enriched with the egg-and-dart or other pattern
Neck molding
Picture rail ? Functional molding installed 7?9 feet above the floor from which framed pictures and paintings are hung using picture wire and picture rail hooks. Primarily seen in older homes with plaster walls, as hammering in nails to hang pictures would damage the plaster. Furthermore, the plaster may not be strong enough to support a picture.
Rosette ? Circular, floral decorative element found in Mesopotamian design and early Greek stele. Part of revival styles in architecture since the Renaissance.3
Scotia ? Concave molding with a lower edge projecting beyond the top and so used at the base of columns as a transition between two torus moldings with different diameters3
Screen molding ? this is a small molding that is used to hide the area where a screen is attached to the frame.
Shoe molding, toe molding or quarter-round ? often used at the bottom of the baseboard to cover a small gap or uneven edge between the flooring and the baseboard.
Strapwork - Popular in England in 16th & 17th. centuries, used in plaster on ceilings,5 also sculpted in stone on exterior of buildings, e.g. around entrance doors. Also carved in wood, and used for topiary designs for parterres. Imitates thick lengths of leather straps applied to a surface to produce pattern of ribs in connected circles, squares, scrolls, lozenges etc.
Torus ? Convex, semi-circular molding, larger than an astragal, often at the base of a column, which may be enriched with leaves or plaiting.6
Trim molding ? A general term used for moldings that are used to create added detail or cover up gaps. They can include corner moldings, cove moldings, rope moldings, quarter rounds, and accent moldings.7

Źródło: https://en.wikipedia.org/wiki/Molding_(decorative)


Types of molding

Types of molding include:

Blow molding
Powder metallurgy plus sintering
Compression molding
Extrusion molding
Injection molding
Laminating
Reaction injection molding
Matrix molding
Rotational molding (or Rotomolding)
Spin casting
Transfer molding
Thermoforming
Vacuum forming, a simplified version of thermoforming


Źródło: https://en.wikipedia.org/wiki/Molding_(process)